Skip to product information
1 of 3

Frenchic Paint Australia

Flamenco Wall Paint Sample

Flamenco Wall Paint Sample

Regular price $3.00 AUD
Regular price Sale price $3.00 AUD
Sale Sold out

Flirt with your flamboyant side with this gorgeous deep toned red – evoking the hot emotions of Andalusia! The colour of the Frenchic heart!

Try before you buy! Make your decision simple by testing our Chalk Wall Paint colours at home.  These 10ml paint sample sachet testers can be applied straight onto your wall or onto a piece of card, or strong paper, so you can move the colour around the room. This will help you to see how light and surroundings highlight tones and subtle hues.

--- Information ---

General

  • Water based
  • Suitable for interior use only
  • Chalk and mineral paint formulated for trims, skirting, doors etc. Also suitable for other interior woodwork, powder coated radiators, and all sorts of furniture including laminate
  • UKCA and EN71-3 certified (safe for use on children’s toys) EN71-3:2013+A3:2019
  • Minimal VOC content and low odour
  • Finish – soft satin sheen
  • Self-sealing - does not require a top coat
  • Self-priming – no primer or undercoat required for any surface except bare metal (in which case use a suitable metal primer)

Coverage

  • A 2.5l tin will provide a coat of up to 35m2. For a durable finish, 2 coats are required, so your 2.5l tin should provide full coverage for approximately 17.5m2 on non-porous surfaces. Thinner application may affect durability. Porous surfaces will affect the rate of coverage and require additional coats.

Preparation

  • Ensure surfaces are in suitable condition for painting and clean, dry, free from wax, grease of penetrating substances and in sound condition. If previously painted, remove loose or flaking paint. Fill any holes/imperfections with a suitable filler.
  • Surface preparation required in addition to the above – clean with Frenchic Sugar Soap, rinse and dry. Hand-sand sufficiently to abrade the surface. Wipe off any dust, paint away! For a great demonstration, see our video from Frenchic TV.
  • Take care on opening the tin lid – a Frenchic tin opener is recommended.
  • Stir thoroughly with a wide implement prior to each use.

Application, drying and sealing

  • Apply with a good quality brush or a roller, Also suitable for spraying - thin with up to 15% tap water and apply additional coat(s).
  • Allow a minimum of 2 hours between coats (even if the paint feels touch dry).
  • Curing time is up to 2 weeks in normal conditions. Treat the newly painted surface with care until then.
  • For floors, to avoid damaging the finish, do not walk on the area for 4 hours after painting and then with socks for the next 7 days. Also, try to keep pet paw claws off as well during this period. Do not allow the surface to become wet for at least a week. Continue to treat with care for up to 3 weeks.

Clean up and storage

  • Reseal tin after use. Clean up any spills immediately with water. Wash brushes in warm, soapy water.
  • Do not store where the tin could be subjected to damp, frost, freezing or high temperatures.
View full details